BMT Durocell 22 ECO, Eplon Protective Coated Natural Gravity Air Convection, 0.8 cu. ft. (22L), 115V, 8A

BMT Durocell 22 ECO, Eplon Protective Coated Natural Gravity Air Convection, 0.8 cu. ft. (22L), 115V, 8A

BMT Ecocell 222 ECO, Natural Gravity Air Convection, 7.8 cu. ft. (222L), 115V, 15.7A

BMT Ecocell 222 ECO, Natural Gravity Air Convection, 7.8 cu. ft. (222L), 115V, 15.7A

BMT Durocell 55 ECO, Eplon Protective Coated, Natural Gravity Air Convection, 1.9 cu. ft. (55L), 115V, 10.4A

BMT Durocell 55 ECO, Eplon Protective Coated, Natural Gravity Air Convection, 1.9 cu. ft. (55L), 115V, 10.4A

BMT Durocell 22 ECO, Eplon Protective Coated Natural Gravity Air Convection, 0.8 cu. ft. (22L), 115V, 8A

$3,318.60
Availability: In stock
Product SKU
MC 000206
BMT Durocell 22 ECO, Eplon Protective Coated Natural Gravity Air Convection, 0.8 cu. ft. (22L), 115V, 8A is available to buy in increments of 1

Gravity Convection Ovens

DUROCELL High durability

A special line DUROCELL with a highly resistant coating of EPOLON that protects the inner stainless steel surfaces from aggressive agents, such as acids and liquors. These units enable an optimal tempering of materials. They are ideal for acid and basic hydrolysis, extraction through incombustible substances and decomposition of substances at a solid phase.

The cost-effective drying oven series DUROCELL with the chamber volume of 22, 55, 111 and 222 litres, working temperature from +5 °C above ambient temperature up to 125°C, precise temperature control and stainless chamber protected by coating of highly resistant plastic Epolon, is suitable for work with acids and liquors, for acid and basic hydrolysis etc. The series DUROCELL is characterized by perfect corrosion prevention of all chamber parts, noiseless run and soft air ventilation within the chamber. This device offers high operating comfort, precise control and short times of temperature recovery in the chamber after door opening. The devices DUROCELL meet requirements of technical-legislative regulations in CZ and EU.

Basic Design Components

Sturdy design and perfect corrosion prevention are ensured by a self-supporting outer jacket made of galvanized steel sheet with hard and resistant baking varnish on the outer side. The inner double-jacket chamber and the door panel are made of high-quality stainless steel (DIN 1.4301, AISI 304). Inner walls and the door panel are provided with a highly resistant Epolon-coating for higher protection. For the purpose of energy saving and minimizing the heat radiated to the ambient air the chamber is perfectly insulated with an ecological insulating material. The inner walls of the chamber can be easily removed without using any tool, e.g. for the purpose of cleaning. On top of that the chamber has a continuously adjustable air flap and can be provided with a door with window and an interior lighting on request. The door is secured at four points for perfect tightening.

High-tech systems for heating and drying of materials with an accurate and reliable run of individual processes, suitable for use in research, development, production, business activities, or for quality control. The sectional principle that applies to the design of laboratory ovens allows a wide range of optional equipment and accessories. The basic model is available – depending on the oven type – in volume size range from 22 to 707 liters, with either natural or forced air circulation and possibility to connect the vacuum.

The parameters inside the unit chamber are monitored and documented with the help of a PC, using a special SW WarmComm (optional equipment).

The laboratory ovens line meets the requirements of reproducibility and accuracy of temperature distribution and other parameters in temperature boxes, derived form such quality standards like ISO 9000 or ISO/17025.

Our laboratory ovens comply with the requirements of operation in accredited or certified laboratories.

Features:

  • Highly durable laboratory oven
  • 22-liter chamber volume
  • Working temperature of from +5°C over ambient temperature up to 125°C
  • Natural fine air flow in the chamber, noiseless operation
  • High-quality and safe drying, heating and tempering of laboratory materials in laboratories and industry; perfect anticorrosive protection of all chamber parts (protective Epolon plastic) enabling wirk with acids and dases, acid and alkaline hydrolysis etc.
  • High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening
  • Standard model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
  • Wide range of optional equipment and accessories
  • Output for a printer or PC connection
  • Validation possibility (IQ , OQ)

Durocell Technical specification for Epolon coating

  • Epolon special layer based on the organic polymer burned paint
  • Epolon Temperature resistance: resistant up to 125 °C
  • Temperature Range: 5°C above ambient to 125°C
  • Chemical resistance (tested at room temperature):
  • Resistant against Solvents:
  • Chemical resistance (tested at room temperature)
  • Resistant against Solvents:
    • ethyl alcohol, butyl alcohol, benzene, toluene, xylene – fully resistant
    • trichlorethylene, perchloroethylene, methylidyne, acetone – slightly softened surface
  •  Resistance against acids and alkaloid liquids:
    • diluted acids (10%: H2SO4, HCL, H3PO4) – fully resistant lactide, acetic acid – fully resistant
    • 10% sodium hydroxide, potassium hydroxide, citric acid – fully resistant 

 

Duro

durocell

 

Technical Specifications:

Model Number  MC 000206
Interior Material 
Stainless Steel No. 1.4301
Volume 0.8 cu. ft. (22 l)
Depth 13.8" (350 mm)
Width 9.4" (240 mm)
Height 11.8" (300 mm)
Standard equipment 2 pcs
Storage Area (w × d) 7.3" x 10.4" (185×265 mm)
Racks 4 max. 
Distance Between Guide Rails 2.4" (60 mm)
Maximal Weight of the Load *
Inside the Oven 55 lbs. (25 kg)
Per Tray 22 lbs. (10 kg)
Door
1 pcs
External dimensions (including door and handle)
Depth 22" (560 mm)
Diameter of the Air Branch Outer/Inner 2"/1.9" (52/49 mm)
Width 19.7" (500 mm)
Height, Incl. Feet and Rolls 24" (610 mm)
Package Dimensions (three layers carton)
Depth 28.3" (720 mm)
Width 19.7" (500 mm)
Depth 31.9" (810 mm)
Weight
Gross  79 lbs. (36 kg)
Net  68 lbs. (31 kg)
Working Temperature (beginning of the regulation)
from 5 °C above ambient temp. to 125 °C
Temperature accuracy according to DIN 12 880 T2, at working temperature with closed air flap and door
time variation cca (±) 1 °C
space deviation cca (±) % of the reached temperature 2,7 %
Time required to reach 250 °C with closed air flap and voltage 230 V
34 min
Heat emission at 250 °C
140 W
Air exchange speed at 150 °C
6 per hour
Electricity - mains 50/60 Hz
Max. Power Input 0.9 kW
Nominal Voltage 115 V
Current 8 A
Input in Stand by Mode 920 W
More Information
Price $3,318.60
Technical Specifications
Model Number  MC 000206
Interior Material 
Stainless Steel No. 1.4301
Volume 0.8 cu. ft. (22 l)
Depth 13.8" (350 mm)
Width 9.4" (240 mm)
Height 11.8" (300 mm)
Standard equipment 2 pcs
Storage Area (w × d) 7.3" x 10.4" (185×265 mm)
Racks 4 max. 
Distance Between Guide Rails 2.4" (60 mm)
Maximal Weight of the Load *
Inside the Oven 55 lbs. (25 kg)
Per Tray 22 lbs. (10 kg)
Door
1 pcs
External dimensions (including door and handle)
Depth 22" (560 mm)
Diameter of the Air Branch Outer/Inner 2"/1.9" (52/49 mm)
Width 19.7" (500 mm)
Height, Incl. Feet and Rolls 24" (610 mm)
Package Dimensions (three layers carton)
Depth 28.3" (720 mm)
Width 19.7" (500 mm)
Depth 31.9" (810 mm)
Weight
Gross  79 lbs. (36 kg)
Net  68 lbs. (31 kg)
Working Temperature (beginning of the regulation)
from 5 °C above ambient temp. to 125 °C
Temperature accuracy according to DIN 12 880 T2, at working temperature with closed air flap and door
time variation cca (±) 1 °C
space deviation cca (±) % of the reached temperature 2,7 %
Time required to reach 250 °C with closed air flap and voltage 230 V
34 min
Heat emission at 250 °C
140 W
Air exchange speed at 150 °C
6 per hour
Electricity - mains 50/60 Hz
Max. Power Input 0.9 kW
Nominal Voltage 115 V
Current 8 A
Input in Stand by Mode 920 W
Convection Gravity Convection
Oven Capacity 0.8 cu ft.
Oven Voltage 115V
We found other products you might like!