Grade Quartz-A-HT cut 9.0cm diameter - 2.2um High Heat Binderless Quartz Glass Microfiber Filter Media, 1150ºC Temperature, 100/pk
Grade Quartz-A-HT Glass Fiber Filter
Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media. The efficiency rating of the filter is characteristic of the complex void space structure that develops as the fibers overlap. The fibrous material within the filter is commonly glass microfiber, cellulose or polypropylene. In depth filters using glass microfiber, the purity of the filter is dictated by the presence of, if any, binder material that acts as a strengthening agent and aids in holding the fibers together. All of the media described on this page are 100% borosilicate glass and free of binders.
Because of the characteristically high flow rates of depth filters, they are generally used in applications such as single and multi process removal of sediment and coarse particulate. Glass microfiber filters without binders are an ideal medium to entrap sediment for further analysis and counting due to the inert matrix. Also, depth filtration media are commonly used for pre-filtration prior to surface filtration with substrates such as membranes.
IW Tremont Grade QUARTZ A-HT Glass Microfiber Filter Paper: Fine porosity, high-purity, binder-free quartz glass microfiber filter media with a 99.999% efficiency in air filtration for the retention of 2.20um particles. Flow rate 1.1 - 1.35 m3/min (Resistance 95mmH20@10.5 ft/min). Primarily used in air pollution monitoring, atomic absorption spectroscopy, flame emission spectrometry and other applications where an extremely critical analysis is needed. Effective temperature range of up to 1150°C.
Features:
- Diameter: 9.0cm; Porosity: 2.0 to 2.2um
- Flow Rate: 1.1 to 1.35 m3/min (Resistance 95mmH20 at 10.5-Feet/Minute). Basis Weight: 85g/m2. Thickness: 0.45 - 0.47mm.
- Fine porosity with a 99.999% efficiency in air filtration for the retention of 2.2um particles. Max Temp: 1150*C. Loss on Ignition: <2%.
- Ideal for use in acidic gases and aerosols, stacks and flue gas monitoring.
- Meets or exceeds the physical, performance and elemental requirements for EPA PM10 Ambient Air Monitoring standard methods.
Technical Specifications:
Model Number | HT-Q9000 |
Grade Nomenclature | Quartz-A-HT |
Particle Retention (¼m) | 2.20 |
Material Type | High Heat Binderless Borosilicate Glass Microfiber |
Thickness (mm) | 0.47 |
Filtration Speed (sec.) | <5 |
Basis Weight (g/m2) | 85 |
Max Temp | 1150ºC |
QTY | 500 |
Cross Reference | |
GE/Whatman Equivalent | n/a |
Pall Equivalent | n/a |
Millipore Equivalent | n/a |
Ahlstrom Equivalent | n/a |
MFS/Advantec Equivalent | n/a |
Sartorius | n/a |
Environmental Express (CP) Equivalent | n/a |
Technical Specifications |
| ||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Grade Nomenclature | Quartz-A-HT | ||||||||||||||||||||||||||||||||||
Filter Material | Glass Microfiber | ||||||||||||||||||||||||||||||||||
Particle Retention | 2.2um | ||||||||||||||||||||||||||||||||||
Filter Diameter (cm) | 9.0 cm |