Syringe Filters, Polyamide/Nylon (PA), Glass Microfiber Prefilter, 0.22um, Non-sterile, 25mm, 100/pack
Availability: In stock
SKU
10234
Description
Syringe Filters Polyamide/Nylon (PA)
$280.76
Syringe Filters, Polyamide/Nylon (PA), Glass Microfiber Prefilter, 0.22um, Non-sterile, 25mm, 100/pack is available to buy in increments of 1
HPLC Certified High-quality and cost-effective Syringe Filters are available in a broad range of membrane materials with sterile and non-sterile packaging options.
Polyamide/Nylon (PA) - Hydrophilic
- Hydrophilic material; it is recommended for filtration of aqueous or organic/aqueous medium polar liquids
- Commonly used for general laboratory filtration and filtration of HPLC and GC samples prior to injection
- Filtration of aqueous and organic-aqueous polar medium liquids
- Dissolution sample analysis
- Suitable for use with high pH samples
- Since it binds proteins it is NOT suitable for protein recovery applications
- With microfiber prefilter higher absorption capacity for contamination
Glass Fiber Prefilters
- For viscose solutions or turbid liquids
- Ideal for use as a prefilter in series with other syringe filters
- Glass microfiber filter media enclosed in this series is binderless 1.0 μm retention
- Reduces clogging of the membrane, so ideal as a prefilter to increase throughput and flow rate
- Ideal for dissolution testing and general filtration
- Applicable to all membrane types, allowing higher flow rates
- Good compatibility with strong acids, bases and organic solvents
- Similar in composition to I.W. Tremont binderless borosilicate glass microfiber media available as disks and sheet
Features of our Syringe Filters:
- Disposable
- Luer-Lok™ and pressure fitting
- Ultrasonically bonded for reliability
- Filter media type clearly inscribed on barrel
- Excellent unit-to-unit and lot-to-lot reproducibility and consistency
- High purity virgin polypropylene housing, no dyes or pigments added
- Every unit type is available as an individually wrapped gamma sterilized pack
- Unique concentric funnel shaped barrel increases volume and decreases back pressure
Common Competitive Equivalents:
GE/Whatman Equivalent |
6870-2502 |
Technical Specifications:
Part Number | 10234 |
Material | Nylon |
Surface area (cm2): | 0.65 |
Sample volume (ml): | <15 |
Maximum pressure (bar): | 45 |
Hold up volume (μl): | 8.5 |
Connector inlet: | Luer-Lok™ |
Conncector outlet: | luer-slip (non-barb) |
Sterile | No |
Pre-Filter | Yes |
QTY | 100/PK |
Technical Specifications |
| ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Membrane Material | Nylon | ||||||||||||||||||||||
Sterility | Non-Sterile | ||||||||||||||||||||||
Pore Size | .22um | ||||||||||||||||||||||
Pre-Filter | Pre-Filter | ||||||||||||||||||||||
Filter Diameter | 25mm | ||||||||||||||||||||||
Wetting | Hydrophilic |
We found other products you might like!