Yamato SM520, Large Capacity Sterilizer with Dryer 1.8 cu. ft. (50L), 100-120V 20.5~24.5A

Yamato's large capacity, high performance, fully automatic sterilization from start to finish.  The temperature can be adjusted on the easy-to-use 7" touch screen.  It's suitable for protein modification at the maximum operating temperature of 135 °C and includes an 11 L, heat-resistant container made of stainless steel. The sterilizer is also equipped with safety functions including forced cooling and memory functions and multiple safety-locking mechanisms for the lid.  Users can enter sterilization settings (time and temperature) for future use. The unit includes mesh baskets, a drain board, a chemical indicator, a droplet tray, two sterilizing pipes, and two drying pipes.  

 

Accessories information: Additional mesh baskets available separately.

 

Operation and functions:

• Interactive keypad input (touch panel) allows committing sterilization settings (time & temperature) to memory
• 7″ interactive touch screen
• Suitable for protein modification at the maximum operating temperature of 135°C
• Easy settings and operation modes for a multitude of sterilization process
• Increased safety and function list including forced cooling and memory functions
• Equipped with multiple safety locking mechanism for the lid
• Comes with large capacity (11L) heat resistant stainless steel container
• Alarm buzzer sounds when high or low pressure error occurs

 

SM Series Catalog

 

Mode	Name	Course
1	Instrument sterilize	Heat → sterilize → air purge
2	Fluid sterilize	Heat → sterilize → air purge
3	Sterilize & Retain temp.	Heat → sterilize → air purge → retain temp.
4	Liquefy & Retain temp.	Heat → liquefy → retain temp.
5	Instrument dry	Heat → air purge → cool
6	Sterilize & Dry	Heat → sterilize → air purge → drain → dry

 

Low Height Sterilizer

Standard Equipped with Cooling Fan

• Cooling fan starts after sterilizaton operation
• Cool down to safe temperature
• Time saving
• Optional between forced cooling and natural cooling

 

 

Technical Specifications:

 

Model	SM520
System	Automatic high pressure steam sterilization
Sterilize Temperature	105 to 135°C
Liquefy Temperature	60 to 110°C
Retain Temperature	45 to 60°C
Preheat Temperature	45 to 80°C
Dry Temperature	135 to 150°C
Operating Ambient Temp.	5 to 35°C
Maximum Pressure Capacity	0.255MPa
Heating Sterilize Pipe	1000W ×2
Drying Pipe	110V/295W×2, 110V/455W×2
Temp. Controller	PlD controlled by microprocessor
Temp. Setting / Display	Touch panel
Timer / Timer Resolution	Range: 0 or 1min to 99h59min / 1 min.
Safety Device	Sterilize sensor error, sterilize SSR short circuit, dry sensor error, dry SSR short circuit, sterilize heater disconnection, dry heater disconnection, water level detection (liquid expansion method), independent chamber overheat protection, cover unlock error, chamber over pressure protection, under pressure protection, warning about setting error in cooling water container, memory error, pressure switch (0.25MPa), pressure safety valve (0.255MPa)
Internal Dimensions	13.1x16.6 in. (370 x D470 mm)
External Dimensions WxDxH	18.4x23.3x31.1 in. (520 x 660 x 881 mm)
Internal Capacity	13.2 gal. (50L)
Power Source (50/60Hz) Voltage	AC100-120V (no plug, round terminal)
Sterilize Current	25-21A
Dry Current	13.5A
Weight	250 lbs. (~113kg)
Included Items	2 pcs. stainless steel mesh basket (332 x D195.5 mm) OSQ-90
	Drain board x 1, drain bottle x 1, chemical indicator 1 set, filter x 1, droplet tray x 1