Accuris Micrplate Reader and SmartWasher Microplate Washer BUNDLE
Accuris SmartWasher 96 Microplate Washer, 115v
The Accuris SmartReader 96 is a welcome addition to any lab that is routinely measuring concentration or absorbance in 96 well plates. The instruments 7 inch touch screen, intuitive software and graphical interface makes it easy to use as a standalone instrument (a separate computer and additional software is not required).
The SmartReader 96 comes complete with 4 popular filters: 405,450,492,630nm and twenty six additional filters are available separately to cover a full range from 340 to 750nm. The integrated filter wheel allows up to 8 filters to be loaded at once, and filters can be selected during programming
Use the touch screen, or connect a mouse for programming and operation. The menu interface allows the user to choose the wavelength filter, set shaking parameters, enter details of the plate layout, and also choose the details for the reading protocol and data calculations.
Up to two filters can be used for 2 measurements of the sample plate, for calculated comparisons. Kinetic calculations can be performed by setting multiple readings.
The SmartReader 96 is a convenient stand alone reader, all software and the programing system is incorporated into the electronics. However, a convenient USB port on the side allows quick and easy saving of data files to a USB drive, and the universal .csv files can then be shared or transferred to a computer for storage or further processing. A data port can be used for connecting a computer or basic printer.
The plate layout interface allows for quick and intuitive set up of a plates well contents. The display shows a graphical representation of the 96 well plate, and the user can label each well as required for: known standard, unknown sample, blank well, QC control well, negative control, positive control, or empty. The interface allows highlighting and labeling multiple wells to save time.
Measurement data is available immediately on the screen after a reading, as well as interpretations, calculated analysis and curve fittings
Features:
- Intuitive, 7 inch color touch screen control panel
- Filter based system with wavelength range from 340 to 750nm
- Operates as a stand alone system, with USB flash drive drive for data transfer
- Absorbance range: 0.0 to 4.0000 Abs
- 8 channel vertical optical path, with zero dispersion
- Integrated, multi-speed plate shaker
Technical Specifications
Model | MR9600 |
Control and Display | 7 inch touch screen(800 x 480 pixels) |
Light Source | Quartz-halogen lamp 6V/10W |
Wavelength range | 340-750nm (405, 450, 492and 630 nm filters included) |
Half-Bandwidth of filter | 3~9nm |
Readout Range | 0~4.000 Abs |
Linearity (405nm) | 0~2.000 Abs <+1% |
0~4.000 Abs <+2% | |
Precision | CV</= 0.2% (0-3) Abs |
CV</= 01.0% (3-4) Abs | |
Test Speed | <6 sec. for 96 well plate |
Incubator | No |
Shaking | 3 modes: slow, medium, fast |
User Interface | Integrated software,touch screen control |
Storage | 200 programs,100,000 test records |
Ports | USB ports for PC, printer,mouse and flash drive |
Dimensions | 295x440x225 mm11.6 x 17 x 8.75 inches |
Weight | 10 kg |
Research requires flexibility the SmartWasher" 96 provides it. Full plates, partial plates, and strips with U, V, C, or flat bottoms are accepted by this fully automated washer. Multiple aspiration point settings allow for minimal residual liquid in the wells after aspiration. All parameters, including dispense volume, suction time, soak and shake cycles, and shaking speed are easily programmed using the large 4.3 LCD display and keypad. Up to 100 wash protocols can be stored on board the SmartWasher" 96 and recalled when needed, or transferred between machines with a flash drive.
The washer comes equipped with 2 wash bottles, 1 rinse bottle and a waste bottle. All have sensors that alert the user when the solutions are low, or in the case of the waste bottle, when it needs to be emptied. An auto-rinse function primes the dispensing tube and wash heads to prevent cross contamination and clogs.
8- and 12-channel wash heads are available separately to accommodate plates in either orientation. A transparent, acrylic shield surrounds the wash area, allowing for visualization of the plate. Should a spill or leak occur, the beveled spill well ensures that the liquid is extracted immediately to avoid cross-contamination.
The SmartWasher" 96 is the perfect partner for the SmartReader" 96 Microplate Absorbance Reader as well as other popular readers.
The Accuris SmartWasher" 96 automates the process of ELISA plate washing so assays can be prepared quickly, accurately, and with confidence for absorbance reading. Its the perfect companion to our popular SmartReader" 96 microplate reader.
Features:
- Precision control of aspiration needle position
Accurate to 0.1mm
Minimal residual liquid, d1¼l/well - Auto rinse function eliminates cross contamination
- Up to 100 wash protocols can be customized and stored
- Liquid level sensors in wash and waste bottles
- Wash protocols can be transferred via flash drive
- 8- and 12-channel wash heads are available separately
Technical Specifications:
Model Number | MW9600 |
Wash Heads | 1 x 8 or 1 x 12 |
Plate types | Flat, U, V, or C bottom |
Washing volume | 50-2000¼l, in 50¼l increments |
Dispensing accuracy | d2% @300¼l |
Dispensing precision | CV d1.5% @ 300¼l |
Aspiration modes | Single, two, and three points |
Residual liquid | d1¼l |
Soaking and shaking time | 1 second to 99 minutes |
Shaking speed | Slow, medium, fast |
Bottle capacity | 4 x 2.5L, 2 wash, 1 rinse, 1 waste |
Data connection | USB for flash drive |
Dimensions (W x D x H) | 13.6 x 18.11 x 7.87 in |
Weight | 12kg / 26.4 lbs |
Electrical | 110-240VAC, 50/60Hz |
Technical Specifications |
|
---|