Save 10% on Next Order
|
From $163.85
To $828.12
Southern Labware is proud to offer its customer's the oppurtunity to build their own Lab Frame and clamp system. So choose your frame and whatever clamps you want to go with it.
The Lattice Lab System is a lightweight flexible set of support rods and clamps that allows a wide range of lab apparatus to be assembled and securely supported. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of castalloy.
Features:
Contents:
The Lattice Lab System is a lightweight flexible set of support rods and clamps that allows a wide range of lab apparatus to be assembled and securely supported. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of castalloy.
Contents:
This Lattice Lab System features an assortment of aluminum rods, including 10 rods that are 48" long. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.
Contents:
This Lattice Lab System set features aluminum rods up to 72" long. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy..
Contents:
Burette clamp is excellent for holding small objects. The jaws open from 15mm to 45mm (1/2" to 1-3/4"). The clamp attaches to rods up to 13mm (1/2") O.D. Jaws can be rotated and locked at any angle. Jaws are covered with PVC sleeves.
2-Prong Extension Clamp with Steel Rod. Features a 2-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8".
3-Prong Clamp Extension Clamp With Steel Rod. Features a 3-prong die-cast clamp attached to a chrome-plated steel rod. Prongs are covered with rubber tubing. Overall length is 10".
Clamp Holder. Plated steel double clamp. Accepts rods up to 3/4" diameter (19 mm). One clamp can be rotated 360° along its axis and locked in any position. Length across clamps is 4.5".
Our deluxe line of 3-prong extension clamps are constructed of pressure die-cast zinc alloy and are chrome-plated. Prongs open to about 3", have a recommended maximum grip size of about 2.25", and feature double keyed spring-type adjustment screws. Extension rod is 8.25" long, 5/16" O.D., with an overall length of 12.75".
2-Prong Clamp with Boss Head, Cork Coated Grips. Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature a spring-type adjustment key. Boss head clamp can swing freely and is lockable at any angle up to 360°, and can be used with rods up to 19mm.
2-Prong Clamp with Boss Head, PVC Coated Grips. Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature a spring-type adjustment key. Boss head clamp can swing freely and is lockable at any angle up to 360°, and can be used with rods up to 19mm.
Our deluxe line of 3-prong extension clamps are constructed of pressure die-cast zinc alloy and are chrome-plated. Prongs open to about 3", have a recommended maximum grip size of about 2.25", and feature double keyed spring-type adjustment screws. Extension rod is 8.25" long, 5/16" O.D., with an overall length of 12.75".
This extension clamp features heavy-duty electroplated zinc alloy construction and dual prong adjustments. The 5" long extension rod is constructed of stainless steel. Prongs open to about 4", have a recommended maximum grip size of about 3.25", and feature double keyed spring-type adjustment screws. Prongs are covered with non-slip PVC sleeves. Overall length is 10.75". Maxiumum Temp. 80C
Support Ring with Clamp 2" - 7" O.D. The rings are cast iron with a enamel finish. The set screw is nickel plated steel.Accepts rods upto 12.5mm. Distance from support to center of ring is 4-1/2" for all sizes.
Deluxe Burette clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes. The adjustable clamps hold up to 30mm O.D. burettes, which are held in place by the pressure created by the springs. For use with rods up to 19mm diameter.
Technical Specifications:
| Model Number | Clamp Type | Prong Type |
| CLBURDS | Burette Clamp | Single |
| CLBURDD | Burette Clamp | Double |
Technical Specifications:
|
Model Number |
Description |
|
LLS001 |
Lab Frame - Aluminum 24" X 24" |
|
LLS002 |
Lab Frame - Aluminum 36" X 48" |
|
LLS003 |
Lab Frame System-Large, 4ft., Aluminum |
| LLS004 |
Lab Frame - Aluminum 48" X 72" |
| CLEX01 |
2-Prong Extension Clamp with Steel Rod |
| COBR3-FR |
Burette Clamp With Boss Head, Coated Jaws |
| ECLJ03 |
3-Prong Clamp Extension Clamp With Steel Rod |
|
CLMS01 |
Swivel Clamp Holder |
|
ECPVC1G |
3-Prong Clamp, With Rod, PVC Coated Grips |
|
CLCORK2 |
2-Prong Clamp with Boss Head, Cork Coated Grips |
|
CLPVC2 |
2-Prong Clamp with Boss Head, PVC Coated Grips |
|
ECPVC2G |
3-Prong Clamp, W/Boss Head, PVC Coated Grips |
|
CLHD03 |
3-Prong Heavy Duty Extension Clamp with Stainless Steel Rod |
| SRCI02 |
Support Ring with Clamp 2" O.D. |
| SRCI03 |
Support Ring with Clamp 3" O.D. |
| SRCI04 |
Support Ring with Clamp 4" O.D. |
| SRCI05 |
Support Ring with Clamp 5" O.D. |
| SRCI06 |
Support Ring with Clamp 6" O.D. |
| SRCI07 |
Support Ring with Clamp 7" O.D. |
| RTCLMP1 |
Clamp Holder, Right Angle, Cast Aluminum |
| Technical Specifications |
| |||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Subscription Enabled | No |
