69-oz. Whirl-Pak® Filter Bag for Homogenizer Blenders

69-oz. Whirl-Pak® Filter Bag for Homogenizer Blenders

55-oz. Whirl-Pak® Filter Bag for Homogenizer Blenders

55-oz. Whirl-Pak® Filter Bag for Homogenizer Blenders

92-oz. Whirl-Pak® Filter Bag for Homogenizer Blenders

92-oz. Whirl-Pak® Filter Bag for Homogenizer Blenders

69-oz. Whirl-Pak® Filter Bag for Homogenizer Blenders

Availability: In stock
SKU
B01416WA
Description

Whirl-Pak® Filter Bag for Homogenizer Blenders

$346.33
69-oz. Whirl-Pak® Filter Bag for Homogenizer Blenders is available to buy in increments of 1

These special bags contain a third middle layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogenizer blender. Bags feature a filter layer of finely perforated polyethylene, to separate the liquid and solids, allowing for easy pipetting of the sample. The hole diameter in the filter layer measures .013 inches (.33 mm), 330 microns, and there are 1,840 holes per square inch, 285 per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side.

Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F (82° C). Bags can be frozen to any temperature, even liquid nitrogen - careful handling required after freezing. All bags are sterilized after manufacturing.

More Information
Technical Specifications

69 oz. (2,041 ml) capacity
7-1/2" W x 15" L (19 x 38 cm)
4.0 mil (.102 mm) thick
Box of 250

Bag StyleFilter Bag