Vibra Laboratory Prime Analytical Balance, 80g x .0001g(0.1mg) -CalQuick Single Button Calibration

Vibra Laboratory Prime Analytical Balance, 80g x .0001g(0.1mg) -CalQuick Single Button Calibration

Accuris Compact Anti Static Ionizer

Accuris Compact Anti Static Ionizer

Vibra Laboratory Prime Analytical Balance, 120g x .0001g(0.1mg) -CalQuick Single Button Calibration

Vibra Laboratory Prime Analytical Balance, 120g x .0001g(0.1mg) -CalQuick Single Button Calibration

Vibra Laboratory Prime Analytical Balance, 80g x .0001g(0.1mg) -CalQuick Single Button Calibration

Availability: In stock
SKU
HT-84
Description

Analytical Balance, .0001g (0.1mg)

$1,054.85
Vibra Laboratory Prime Analytical Balance, 80g x .0001g(0.1mg) -CalQuick Single Button Calibration is available to buy in increments of 1

The HT Series Analytical laboratory balances from Intell-Lab are produced in Japan in one of the cleanest facilities you will ever see. The quality of workmanship and attention to detail is superb. Starting at the bottom of the balance, there are three support points, two of which are adjustable to provide leveling. The base contains the revolutionary Vibra double ended tuning fork sensor, which gives almost instant start up because it does not require a warm up time, unlike conventional force restoration balances. Probably the most stable system on the market, the Vibra module is also very resilient against shipping or any movement induced damage. As there is no coil, it is also stable when weighing magnets.

The floor of the weighing chamber is lined with high quality stainless steel and is fitted with a spill ring (to guard the internal components from accidental spillage), an anti-buoyancy plate to ensure air currents within the chamber do not affect the weighing results and a 3.15” diameter platter. There is plenty of room for large, awkward samples to be weighed in the 6 x 6.25 x 9.5” chamber. The weighing chamber of anti-electrostatic material is easily removable to enable proper cleaning of spills and contamination, as regular cleaning is recommended. The three doors give excellent access for operations such as pipette calibration.

The capacity of the balance offers analytical weighing up to 220 g x 0.1 mg, and reads in 9 weighing units, and Easy RES™ which allows you to change between three response times to suit your application. The balance comes equipped with many programs to match laboratory applications such as GLP, density, parts counting, checkweighing, accumulation, Quick Cal™ calibration, adjustable backlight levels, under balance weighing and Direct to Windows via Serial RS232. The HT Series is a complete solution to any laboratory request for analytical weighing performance. It is supplied with a comprehensive user operation manual to help you get the most out of your investment.

Features: 

  • Vibra® Tuning Fork Inside
  • Windows® Compatible via RS-232 Interface
  • Reads in g, mg, ct, oz, lb, oz t, dwt, GN, mommes
  • Counting, %, Density
  • Accumulation, Checkweighing
  • Adjustable Filtering Levels
  • CalQuick™ Single Button Calibration
  • Below Balance Weighing
  • Pan Size: 3.15" / Draft Shield 8.25"h
  • Resistant to Magnetism
  • Fast Warm-up Time

 

 

 

 

Technical Specifications:

 
Models
HT 84
 
Capacity
80g
 
Readability (d)
0.1mg
 
Verification intervals (e) *1
-
 
Repeatability
0.1mg
 
Linearity
±0.3mg
 
Stabilization time
3.0 sec.
 
Pan size
80mm dia
 
Common Specifications
  
Measuring systemTuning-fork frequency system
 
Tare
Full weighing range
 
EC type approval
available for all models (class 1)

More Information
Technical Specifications
 
Models
HT 84
 
Capacity
80g
 
Readability (d)
0.1mg
 
Verification intervals (e) *1
-
 
Repeatability
0.1mg
 
Linearity
±0.3mg
 
Stabilization time
3.0 sec.
 
Pan size
80mm dia
 
Common Specifications
  
Measuring systemTuning-fork frequency system
 
Tare
Full weighing range
 
EC type approval
available for all models (class 1)

Capacity80g
Readability.00001g(0.1mg)
Calibration TypeAuto-Calibration
We found other products you might like!