Syringe Filters, Polytetrafluoroethylene (PTFE), Glass Fiber Prefilter, 0.45um, Sterile, 13mm, 100/pack

Syringe Filters, Polytetrafluoroethylene (PTFE), Glass Fiber Prefilter, 0.45um, Sterile, 13mm, 100/pack

Syringe Filters, Polytetrafluoroethylene (PTFE), Glass Fiber Prefilter, 0.22um, Sterile, 13mm, 100/pack

Syringe Filters, Polytetrafluoroethylene (PTFE), Glass Fiber Prefilter, 0.22um, Sterile, 13mm, 100/pack

Syringe Filters, Polytetrafluoroethylene (PTFE), Glass Fiber Prefilter, 0.22um, Sterile, 25mm, 100/pack

Syringe Filters, Polytetrafluoroethylene (PTFE), Glass Fiber Prefilter, 0.22um, Sterile, 25mm, 100/pack

Syringe Filters, Polytetrafluoroethylene (PTFE), Glass Fiber Prefilter, 0.45um, Sterile, 13mm, 100/pack

$250.08
Availability: In stock
Product SKU
10199
Syringe Filters, Polytetrafluoroethylene (PTFE), Glass Fiber Prefilter, 0.45um, Sterile, 13mm, 100/pack is available to buy in increments of 1

Syringe Filters Polytetrafluoroethylene (PTFE)

HPLC Certified High-quality and cost-effective Syringe Filters are available in a broad range of membrane materials with sterile and non-sterile packaging options.

Polytetrafluoroethylene (PTFE) - Hydrophilic or Hydrophobic

  • PTFE membranes are inherently hydrophobic; they are ideal for the filtration of nonpolar liquids and gases.
  • Very resistant to solvents as well as acids or bases.
  • Can be made more hydrophilic by flushing with alcohol, followed by water
  • Used for filtering and de-gassing chromatography solvents
  • Permits optimal utilization of small sample volumes
  • Excellent chemical compatibility for filtering harsh chemicals that destroy other membrane materials
  • Moisture barrier for venting applications and vacuum pump line protection
  • Ideal for aerosol sampling
  • Filter viscous organic based HPLC samples
  • Glass microfiber prefilter raises absorption capacity and loading
  • After pre-wetting with alcohol, may be used for fine particle removal of aqueous and mild organic solutions in Ion Chromatography

 

Glass Fiber Prefilters

  • For viscose solutions or for turbid liquids
  • Ideal for use as a prefilter in series with other syringe filters
  • Glass microfiber filter media enclosed in this series is binderless 1.0µm retention
  • Reduces clogging of the membrane, so ideal as a prefilter to increase throughput and flow rate
  • Ideal for dissolution testing and general filtration
  • Applicable to all membrane types, allowing higher flow rates
  • Good compatibility with strong acids, bases and organic solvents
  • Similar in composition to I.W. Tremont binderless borosilicate glass microfiber media available as disks and sheets

 

Features of our Syringe Filters:

  • Disposable
  • Luer-Lok™ and pressure fitting
  • Ultrasonically bonded for reliability
  • Filter media type clearly inscribed on barrel
  • Excellent unit-to-unit and lot-to-lot reproducibility and consistency 
  • High purity virgin polypropylene housing, no dyes or pigments added
  • Every unit type is available as an individually wrapped gamma sterilized pack
  • Unique concentric funnel shaped barrel increases volume and decreases back pressure

 

Syringe

 


Technical Specifications:

Part Number 10199
Material PTFE
Surface area (cm2): 0.65
Sample volume (ml): <15
Maximum pressure (bar): 45
Hold up volume (μl): 8.5
Connector inlet: Luer-Lok™
Conncector outlet: luer-slip (non-barb)
Sterile Yes
Prefilter Yes
QTY 100/PK

  

 

                                                                      Made in the USA

More Information
Technical Specifications
Part Number 10194
Material PTFE
Surface area (cm2): 0.65
Sample volume (ml): <15
Maximum pressure (bar): 45
Hold up volume (μl): 8.5
Connector inlet: Luer-Lok™
Conncector outlet: luer-slip (non-barb)
Sterile Yes
Prefilter Yes
QTY 100/PK
Membrane Material PTFE
Sterility Sterile
Pore Size .45um
Pre-Filter Pre-Filter
Filter Diameter 13mm