Syringe Filters, Polytetrafluoroethylene (PTFE), Glass Fiber Prefilter, 0.45um, Non-sterile, 25mm, 100/pack
Availability: In stock
SKU
10196
Description
Syringe Filters Polytetrafluoroethylene (PTFE)
$280.76
Syringe Filters, Polytetrafluoroethylene (PTFE), Glass Fiber Prefilter, 0.45um, Non-sterile, 25mm, 100/pack is available to buy in increments of 1
HPLC Certified High-quality and cost-effective Syringe Filters are available in a broad range of membrane materials with sterile and non-sterile packaging options.
Polytetrafluoroethylene (PTFE) - Hydrophilic or Hydrophobic
- PTFE membranes are inherently hydrophobic; they are ideal for the filtration of nonpolar liquids and gases.
- Very resistant to solvents as well as acids or bases.
- Can be made more hydrophilic by flushing with alcohol, followed by water
- Used for filtering and de-gassing chromatography solvents
- Permits optimal utilization of small sample volumes
- Excellent chemical compatibility for filtering harsh chemicals that destroy other membrane materials
- Moisture barrier for venting applications and vacuum pump line protection
- Ideal for aerosol sampling
- Filter viscous organic based HPLC samples
- Glass microfiber prefilter raises absorption capacity and loading
- After pre-wetting with alcohol, may be used for fine particle removal of aqueous and mild organic solutions in Ion Chromatography
Glass Fiber Prefilters
- For viscose solutions or for turbid liquids
- Ideal for use as a prefilter in series with other syringe filters
- Glass microfiber filter media enclosed in this series is binderless 1.0µm retention
- Reduces clogging of the membrane, so ideal as a prefilter to increase throughput and flow rate
- Ideal for dissolution testing and general filtration
- Applicable to all membrane types, allowing higher flow rates
- Good compatibility with strong acids, bases and organic solvents
- Similar in composition to I.W. Tremont binderless borosilicate glass microfiber media available as disks and sheets
Features of our Syringe Filters:
- Disposable
- Luer-Lok™ and pressure fitting
- Ultrasonically bonded for reliability
- Filter media type clearly inscribed on barrel
- Excellent unit-to-unit and lot-to-lot reproducibility and consistency
- High purity virgin polypropylene housing, no dyes or pigments added
- Every unit type is available as an individually wrapped gamma sterilized pack
- Unique concentric funnel shaped barrel increases volume and decreases back pressure
Common Competitive Equivalents:
GE/Whatman Equivalent |
6874-2504 |
Technical Specifications:
Part Number | 10196 |
Material | PTFE |
Surface area (cm2): | 3.9 |
Sample volume (ml): | <105 |
Maximum pressure (bar): | 90 |
Hold up volume (μl): | 28.5 |
Connector inlet: | Luer-Lok™ |
Conncector outlet: | luer-slip (non-barb) |
Sterile | No |
Prefilter | Yes |
QTY | 100/PK |
Technical Specifications |
| ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Membrane Material | PTFE | ||||||||||||||||||||||
Sterility | Non-Sterile | ||||||||||||||||||||||
Pore Size | .45um | ||||||||||||||||||||||
Pre-Filter | Pre-Filter | ||||||||||||||||||||||
Filter Diameter | 25mm |
We found other products you might like!