qPCR UF-150 GENECHECKER Ultra-Fast Thermal Cycler
The Integrated camera module of GENECHECKER™ fully monitors and records the fluorescence signal of each sample and the recorded fluorescence values are processed and displayed by GENERECORDER software. Using this unique data analysis method, GENECHECKER™ provides very precise results of reactions compared to conventional real-time PCR instruments in the market which are collecting fluorescence data through an optical scanning method. The user interface of GENERECORDER was designed to help general real-time PCR instrument users operate this innovative instrument very easily. GENERECORDER provides amplification curves, melting curves and melting peaks for easy analysis.
GENECHECKER™ has adopted a special polymer chip (Rapi:chip™) which enables much faster thermal transfer to the samples when compared to conventional PCR tubes or plates. The thermal cycling mechanism of GENECHECKER™ achieves extremely fast ramping rate for both heating and cooling.
Rapichip™ was developed from the understanding of the challenges in routine PCR. We found the protocols duration could be dramatically reduced when efficient heat transfer is made during the thermal cycling process. By designing a unique 3-dimensional polymer chip where the bottom surface is made of a thin film and precisely bonded with a polymer body, ultra-fast thermal cycling became possible.
The QPCR version of Rapichip has 10 wells and the top of each well is open for real-time fluorescence measurement.
GENECHECKER UF-150 comes with GENERECORDER software and is easily installed. No user’s calibration is needed to run the instrument.
Fast and easy qPCR platform that yields results in as little as 12 minutes!
- Patented chip based design provides extremely rapid output - “30 Cycles in 12 Minutes”
- Real-time detection through dedicated software, GENERECORDER
- Innovative and compact design
- Intuitive control with LED indicated jog-dial and LCD display
- Conventional and reverse transcriptase (RT) PCR with single device
The best tool to make your PCR Diagnostics application faster and easier
The technology enables an environmentally friendly design. The machine only uses 70 watts of power, which is up to 10 times less than conventional units. The affordable unit incorporates up to 10 samples and can be used with a portable battery pack for field use. The speed, reduced plastic use and lower energy consumption helps drive down costs. For labs that want to go green, this eco-friendly machine will help achieve those goals.
- UF–150 GENECHECKER Ultra-Fast Real Time PCR System
- Patented Chip design provides extremely rapid output—30 cycles in 12 minutes
- Real-Time detection through dedicated GENERECORDER Software
- Innovative and compact Design
- Intuitive control with LED indicated Jog-Dial LCD Display
- Conventional and Reverse Transcriptase (RT) PCR with a Single Device
|Operating Mechanism||Precise Control of Peltier Element|
|Temperature Accuracy||± 0.5°C|
|Temperature Uniformity||± 0.5°C (Well to Well)|
|Temperature Stability||± 0.5°C|
|Ramping up Rate||8.0°C / second|
|Ramping down Rate||8.0°C / second|
|Temperature Range||30 ~ 65°C (1.0°C Increment) for RT Step|
|20 ~ 99°C (1.0°C Increment) for PCR|
|Sample Format||Polymer Based 3-Dimensional Chip*|
|Number of Samples per Run||10|
|Required Sample Volume||10µl|
|Typical PCR Duration||Approx. 12 minutes for 30 cycles (without RT Step)|
|Method of Detection||Analysis of Digitized Fluorescence Signal|
|Display||4 Line Text LCD|
|Integrated Memory||Saves up to 12 reaction protocols|
|Type of Excitation||High Brightness LED|
|Wavelength||465nm + 10nm|
|Number of Detection Channel||1|
|Method of Fluorescence Meas-urement||Integrated Cameral Module|
|PC Connection||USB 2.0 A to B (PC to Device)|
|Power||AC 100-230V/50/60Hz (Input Power : DC 12V)|
|Power Consumption||120 W|
|Dimension||200mm (w) x 200mm (d) x 127mm (h)|
|Weight||Instrument : 3.2kg (Instrument Only)|