$  pH & Temperature with Independent Dosing Control

pH & Temperature with Independent Dosing Control

Dosing Pump

Dosing Pump

pH & Temperature with Independent Dosing Control

Availability: In stock
SKU
DL122
Description

pH & Temperature Controller

$345.00
pH & Temperature with Independent Dosing Control is available to buy in increments of 1
Monitors and Accurately Controls pH and temperature.  Setup is easy. Calibrate pH at 1, 2, or 3 points in tenths, hundredths,or thousandth , then set target reading for pH and ORP with dosing activation set ABOVE or BELOW target readings. Also set your own CAUTION and CRITICAL levels. The DL122 will gently maintain assigned pH values. Full duplex Wi-Fi allows interaction with unit through your portal from anywhere in the world.  Utilizing Wi-Fi, the unit also sends an alert email or text message to your phone, tablet, PC or Mac.
 
Data Logger Provides Documentation:  The data logging function records all readings, including temperature, at predetermined intervals on the 4GB SD card and also sends them to your portal. A “Snap Shot” button allows you to record real-time readings without interrupting logging schedule.  
 

DL122 includes pH & Temperature with IDC (Independent Dossing Control).  Controller with Wi-Fi and Dual Data logging Full Duplex portal interface.  Unit includes - pH laboratory grade electrode, 6.5' temperature probe, international power supply, starter calibration solutions, power controller box, 7' RJ45 comm cable.


SPECIFICATIONS
Range.001 pH to 14.000 pH
Resolution - User SelectTenths (0.1 pH) - hundreths (0.01 pH) - Thousands (0.001) pH
Accuracy @ 77°F0.02 pH
Set Point RangeFull pH scale 0.01 pH to 14.00 pH
Activation ParameterUser Select above or below activation set point
IDC [ Independent Dosing Control ]User Select days and times of days and length of dossing time each day
Visual Alert/AlarmLED backlight blue = normal; yellow = alarm; red = alert
Probe ProtectionOn Master Board GLP chipset ( Ground Loop Preventor )
Circuit Board ProtectionOn Master Board RJ45 Backfeed Prevention Chipset
Operational Environment15°F to 180°F : (-10°C to 85°C) 
Temperature Accuracy0.3°C or 0.5°F 
SD Data logging card Full Size 4 GB Included with unit
Power SupplyInternational Plug Set - No converter needed
pH ElectrodeMA911B/2  Lab Grade pH Electrode
RJ-45 Cable7 foot RG45 provided -- Optional up to 50 feet
Controller Power Box1 plug for pH dosing or CO2 solenoid control & 1 plug for Timer Set in software
 
 
 
POWER CONTROLLER BOX SPECIFICATIONS:
Controller Power Max Capacity @ 110 volt or 220 volt 10 amps / 1000 watts
Relay Response Time is 20ms
Free Wheeling Diode Protection
Universal Plug -- no converter necessary
Blue LED Light on indicate Plug is active and Power is on
One of the Plug Would serve as timer plug in place of pH or ORP - depending on model
Communication to Master Controller through RJ45 up to a Max distance of 50 Feet

 

 

 

More Information
Technical Specifications
SPECIFICATIONS
Range.001 pH to 14.000 pH
Resolution - User SelectTenths (0.1 pH) - hundreths (0.01 pH) - Thousands (0.001) pH
Accuracy @ 77°F0.02 pH
Set Point RangeFull pH scale 0.01 pH to 14.00 pH
Activation ParameterUser Select above or below activation set point
IDC [ Independent Dosing Control ]User Select days and times of days and length of dossing time each day
Visual Alert/AlarmLED backlight blue = normal; yellow = alarm; red = alert
Probe ProtectionOn Master Board GLP chipset ( Ground Loop Preventor )
Circuit Board ProtectionOn Master Board RJ45 Backfeed Prevention Chipset
Operational Environment15°F to 180°F : (-10°C to 85°C) 
Temperature Accuracy0.3°C or 0.5°F 
SD Data logging card Full Size 4 GB Included with unit
Power SupplyInternational Plug Set - No converter needed
pH ElectrodeMA911B/2  Lab Grade pH Electrode
RJ-45 Cable7 foot RG45 provided -- Optional up to 50 feet
Controller Power Box1 plug for pH dosing or CO2 solenoid control & 1 plug for Timer Set in software
 
 
POWER CONTROLLER BOX SPECIFICATIONS:
Controller Power Max Capacity @ 110 volt or 220 volt 10 amps / 1000 watts
Relay Response Time is 20ms
Free Wheeling Diode Protection
Universal Plug -- no converter necessary
Blue LED Light on indicate Plug is active and Power is on
One of the Plug Would serve as timer plug in place of pH or ORP - depending on model
Communication to Master Controller through RJ45 up to a Max distance of 50 Feet