Description
pH & Temperature Controller
$345.00
pH & Temperature with Independent Dosing Control is available to buy in increments of 1
Monitors and Accurately Controls pH and temperature. Setup is easy. Calibrate pH at 1, 2, or 3 points in tenths, hundredths,or thousandth , then set target reading for pH and ORP with dosing activation set ABOVE or BELOW target readings. Also set your own CAUTION and CRITICAL levels. The DL122 will gently maintain assigned pH values. Full duplex Wi-Fi allows interaction with unit through your portal from anywhere in the world. Utilizing Wi-Fi, the unit also sends an alert email or text message to your phone, tablet, PC or Mac.
Data Logger Provides Documentation: The data logging function records all readings, including temperature, at predetermined intervals on the 4GB SD card and also sends them to your portal. A “Snap Shot” button allows you to record real-time readings without interrupting logging schedule.
DL122 includes pH & Temperature with IDC (Independent Dossing Control). Controller with Wi-Fi and Dual Data logging Full Duplex portal interface. Unit includes - pH laboratory grade electrode, 6.5' temperature probe, international power supply, starter calibration solutions, power controller box, 7' RJ45 comm cable.
SPECIFICATIONS | |
Range | .001 pH to 14.000 pH |
Resolution - User Select | Tenths (0.1 pH) - hundreths (0.01 pH) - Thousands (0.001) pH |
Accuracy @ 77°F | 0.02 pH |
Set Point Range | Full pH scale 0.01 pH to 14.00 pH |
Activation Parameter | User Select above or below activation set point |
IDC [ Independent Dosing Control ] | User Select days and times of days and length of dossing time each day |
Visual Alert/Alarm | LED backlight blue = normal; yellow = alarm; red = alert |
Probe Protection | On Master Board GLP chipset ( Ground Loop Preventor ) |
Circuit Board Protection | On Master Board RJ45 Backfeed Prevention Chipset |
Operational Environment | 15°F to 180°F : (-10°C to 85°C) |
Temperature Accuracy | 0.3°C or 0.5°F |
SD Data logging card | Full Size 4 GB Included with unit |
Power Supply | International Plug Set - No converter needed |
pH Electrode | MA911B/2 Lab Grade pH Electrode |
RJ-45 Cable | 7 foot RG45 provided -- Optional up to 50 feet |
Controller Power Box | 1 plug for pH dosing or CO2 solenoid control & 1 plug for Timer Set in software |
POWER CONTROLLER BOX SPECIFICATIONS:
Controller Power Max Capacity @ 110 volt or 220 volt 10 amps / 1000 watts |
Relay Response Time is 20ms |
Free Wheeling Diode Protection |
Universal Plug -- no converter necessary |
Blue LED Light on indicate Plug is active and Power is on |
One of the Plug Would serve as timer plug in place of pH or ORP - depending on model |
Communication to Master Controller through RJ45 up to a Max distance of 50 Feet |
Technical Specifications |
POWER CONTROLLER BOX SPECIFICATIONS:
|
---|