LC-8 Laboratory/Clinical Centrifuge with 8x15ml Rotor, with Macro Tubes Starter Kit, 5mL Bundle

The LC-8 series of laboratory centrifuges is uniquely designed to meet a wide range of applications in both the clinical and research laboratory. An eight position rotor is included and designed to directly accept 10ml and 15ml test-tubes

(conical or round bottom), while optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily removed from the chamber for cleaning.

The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode.

To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged prior to starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected.

Features:

• Digital Speed control up to 5,000 rpm
• Safety lid-lock, prevents opening lid until rotor stops
• Unique air-flow design keeps samples cool
• 8 tube capacity, for tubes up to 15ml

Technical Specifications:

A. 200 Sterile Snap-Cap Tubes (C2520)

MTC Bio" new 5mL MacroTubes® scale up the conveniences of standard 1.5mL tubes for larger volumes. These polypropylene tubes come with an attached cap that provides a tight, leak proof seal, and can also be opened (or closed) with one hand. The cap is designed to provide a secure seal from -86°C to +80°C.

They have the same diameter as standard 15mL tubes for compatibility with centrifuge rotors, etc. In many applications, they have replaced 15mL tubes, reducing plastic waste, storage space and shipping costs. Contamination of pipettor shafts can be eliminated because the tube length is short enough for standard 1mL and/or 5mL tips to reach the tube's conical bottom.

Features:

• Compatible with standard equipment
• Easy-open flip top
• Syringe port in cap
• Unsurpassed Clarity
• Dual graduations at every 0.2mL and 0.5mL

Technical Specifications:

B. 200 Sterile Screw-Cap Tubes (C2540)

Southern Labwareâ¬"s new 5mL MacroTube⢠family takes all of the conveniences of 1.5mL tubes and scales them up for larger volumes and throughput applications. In many cases, they replace 15mL tubes, dramatically reducing plastic waste, storage space and shipping costs. Additionally, the 56mm length (vs. 120mm for 15mL tubes) greatly reduces the risk of contamination of pipettor shafts, allowing 1mL or 5mL tips to easily reach the tube bottom.

The tubes are made of high clarity, low-binding, virgin polypropylene and are certified RNase and DNase free. The 16mm diameter is identical to standard 15mL tubes, ensuring compatibility with existing centrifuge rotors. Other equipment, specially designed for 5mL tubes, is available from Benchmark⢠(USA) and German-based equipment manufacturers (eg. dry blocks, tube racks, and thermal shakers/vortexers).

Screw Cap Tubes are supplied with 20mm (OD) caps that seal smoothly and completely with a single 360° turn. Useable from -86°C to 110°C, they are a valuable vessel for boiling and low temperature sample preservation. Choose from non-sterile bulk packaging or, similar to 15mL tubes (but requiring 60% less storage space), rack packaging (upright in foam racks with caps attached).

Features:

• Compatible with standard equipment
• Centrifuge at up to 25,000xg
• RNase, DNase & pyrogen free
• Unsurpassed Clarity
• Dual graduations at every 0.2mL and 0.5mL

Technical Specifications:

C. 5 Polycarbonate Cryoboxes (C2581)

Polycarbonate ultra-low temperature cryogenic boxes are designed to hold 1.2mL to 2.0mL cryogenic storage vials. The standard 5 1/4" X 5 1/4" x 2" are compatible with all 5.25" freezer racks. These cryostorage boxes can withstand temperatures to -196C and are fully autoclavable. The innovative hinged lid stays attached to the box and will never get miplaced or attached to the wrong box. Each box comes with alpha-numeric markings as well as a permanently screened unique barcode.

D. Workstation/Decanting Rack (C2592)

Rack for 50 x 5ml Centrifuge Tubes

E. 20 CapLock Clips for 5mL (C2586)

CapLock⢠Clip, with breakaway lifting tabs for 5mL tubes

F 4 Centrifuge Adapters for 5mL (C2570)

Converts 5 ml centrifuge tubes to 15 ml centrifuge tubes.

G. Two-Tiered Pipetting Rack (C2590)

Easy Access Rack

A great workstation, designed specifically for 5mL MacroTube® (also accepts Eppendorf). Tubes are held securely in custom shaped wells that accepts 5mL snap cap and 5mL screw cap tubes. Workstation is also perfect for 15mL conical bottom tubes.

Two tiers make it easier to pipette into the second row and easier to see which tubes are filled or empty.

Features:

• Hold 16 MacroTubes (2 tiers of 8)
• Non-Skid rubber foot
• Also holds 15mL tubes

Technical Specifications

Â