Lab Frame, with Clamps

Lab Frame, with Clamps

Lab Frame - Aluminum 48 X 72 Inches

Lab Frame - Aluminum 48 X 72 Inches

Lab Frame, with Clamps

In stock

SKU
LLS001-CL

From $148.95

To $752.88

Lab Frame, with Clamps is available to buy in increments of 1
Customize Lab Frame, with Clamps

* Required Fields

Lab Frame, with Clamps is available to buy in increments of 1
Your Customization
Lab Frame, with Clamps
Lab Frame, with Clamps

In stock

$148.95

Summary

    Southern Labware is proud to offer its customer's the oppurtunity to build their own Lab Frame and clamp system. So choose your frame and whatever clamps you want to go with it.

    Lab Frame - Aluminum 24" X 24"

    The Lattice Lab System is a lightweight flexible set of support rods and clamps that allows a wide range of lab apparatus to be assembled and securely supported. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of castalloy.

    Features:

    • Setup with foot plates secured to a bench. Two-dimensional lattices can be assembled in units of 24 x 24 with the crossbars horizontal or vertical. The set allows construction of up to two 24 x 24 sections with one crossbar each.
    • Create a portable 24 x 24 lattice. Assemble it using the two 18 support rods with 2 support rods and the foot plates to form a secure base. More 2 rods and two 24 rods form a strong angle brace to maintain the lattice upright.
    • Sections can be added at any angle. This can provide limited stability without securing all of the foot plates to the bench. Add heavy apparatus inside the angle of the sections for stability
    • Support rods are provided in three lengths and are constructed of hard aluminum.
    • Hook Connector connects two 1/2 diameter support rods at right angles with a single thumbscrew.
    • Foot plates accept 1/2 diameter support rods. Three 3/16 countersunk holes allow the foot plate to be secured to a bench
    • Set screw fits into foot plates to secure support rods.

    Contents:

    • Foot Plate, 2-5/16 diameter - 4
    • Set Screw for Foot Plate - 4
    • Anchoring Screw for Foot Plate - 12
    • Hook Connector with Thumbscrew - 22
    • Support Rod, 2 long, 1/2 diameter - 8
    • Support Rod, 18 long, 1/2 diameter - 2
    • Support Rod, 24 long, 1/2 diameter - 8

    Lab Frame - Aluminum 36" X 48"

    The Lattice Lab System is a lightweight flexible set of support rods and clamps that allows a wide range of lab apparatus to be assembled and securely supported. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of castalloy.

    Contents:

    • Foot Plate, 2-5/16 diameter - 4
    • Set Screw for Foot Plate - 4
    • Anchoring Screw for Foot Plate - 12
    • Hook Connector with Thumbscrew - 26
    • Support Rod, 2 long, 1/2 diameter - 8
    • Support Rod, 18 long, 1/2 diameter - 2
    • Support Rod, 24 long, 1/2 diameter - 5
    • Support Rod, 36 long, 1/2 diameter - 2
    • Support Rod, 48 long, 1/2 diameter - 4

    Lab Frame System-Large, 4ft., Aluminum

    This Lattice Lab System features an assortment of aluminum rods, including 10 rods that are 48" long. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.

    Contents:

    • Foot Plate, 2-5/16 diameter - 6
    • Set Screw for Foot Plate - 6
    • Anchoring Screw for Foot Plate - 18
    • Hook Connector with Thumbscrew - 42
    • Support Rod, 2 long, 1/2 diameter - 10
    • Support Rod, 18 long, 1/2 diameter - 3
    • Support Rod, 36 long, 1/2 diameter - 2
    • Support Rod, 48 long, 1/2 diameter - 10

    Lab Frame - Aluminum 48" X 72"

    This Lattice Lab System set features aluminum rods up to 72" long. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy..

    Contents:

    • Foot Plate, 2-5/16 diameter - 8
    • Set Screw for Foot Plate - 8
    • Anchoring Screw for Foot Plate - 24
    • Hook Connector with Thumbscrew - 49
    • Support Rod, 2 long, 1/2 diameter - 6
    • Support Rod, 12 long, 1/2 diameter - 6
    • Support Rod, 24 long, 1/2 diameter - 2
    • Support Rod, 48 long, 1/2 diameter - 7
    • Support Rod, 72 long, 1/2 diameter - 5

    Burette Clamp With Boss Head, Coated Jaws

    Burette clamp is excellent for holding small objects. The jaws open from 15mm to 45mm (1/2" to 1-3/4"). The clamp attaches to rods up to 13mm (1/2") O.D. Jaws can be rotated and locked at any angle. Jaws are covered with PVC sleeves.

    2-Prong Extension Clamp with Steel Rod

    2-Prong Extension Clamp with Steel Rod. Features a 2-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8".

    3-Prong Clamp Extension Clamp With Steel Rod

    3-Prong Clamp Extension Clamp With Steel Rod. Features a 3-prong die-cast clamp attached to a chrome-plated steel rod. Prongs are covered with rubber tubing. Overall length is 10".

    Swivel Clamp Holder

    Clamp Holder. Plated steel double clamp. Accepts rods up to 3/4" diameter (19 mm). One clamp can be rotated 360° along its axis and locked in any position. Length across clamps is 4.5".

    3-Prong Clamp, With Rod, PVC Coated Grips

    Our deluxe line of 3-prong extension clamps are constructed of pressure die-cast zinc alloy and are chrome-plated. Prongs open to about 3", have a recommended maximum grip size of about 2.25", and feature double keyed spring-type adjustment screws. Extension rod is 8.25" long, 5/16" O.D., with an overall length of 12.75".

    2-Prong Clamp with Boss Head, Cork Coated Grips

    2-Prong Clamp with Boss Head, Cork Coated Grips. Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature a spring-type adjustment key. Boss head clamp can swing freely and is lockable at any angle up to 360°, and can be used with rods up to 19mm.

    2-Prong Clamp with Boss Head, PVC Coated Grips

    2-Prong Clamp with Boss Head, PVC Coated Grips. Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature a spring-type adjustment key. Boss head clamp can swing freely and is lockable at any angle up to 360°, and can be used with rods up to 19mm.

    3-Prong Clamp, W/Boss Head, PVC Coated Grips

    Our deluxe line of 3-prong extension clamps are constructed of pressure die-cast zinc alloy and are chrome-plated. Prongs open to about 3", have a recommended maximum grip size of about 2.25", and feature double keyed spring-type adjustment screws. Extension rod is 8.25" long, 5/16" O.D., with an overall length of 12.75".

    3-Prong Heavy Duty Extension Clamp with Stainless Steel Rod

    This extension clamp features heavy-duty electroplated zinc alloy construction and dual prong adjustments. The 5" long extension rod is constructed of stainless steel. Prongs open to about 4", have a recommended maximum grip size of about 3.25", and feature double keyed spring-type adjustment screws. Prongs are covered with non-slip PVC sleeves. Overall length is 10.75". Maxiumum Temp. 80C

    Support Ring with Clamp 2" - 7" O.D.

    Support Ring with Clamp 2" - 7" O.D. The rings are cast iron with a enamel finish. The set screw is nickel plated steel.Accepts rods upto 12.5mm. Distance from support to center of ring is 4-1/2" for all sizes.

    Choice of Burette Clamp, Single or Double

    Deluxe Burette clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes. The adjustable clamps hold up to 30mm O.D. burettes, which are held in place by the pressure created by the springs. For use with rods up to 19mm diameter.

    Technical Specifications:

    Model NumberClamp TypeProng Type
    CLBURDSBurette ClampSingle
    CLBURDDBurette ClampDouble

    Technical Specifications:

    Model Number

    Description

    LLS001

    Lab Frame - Aluminum 24" X 24"

    LLS002

    Lab Frame - Aluminum 36" X 48"

    LLS003

    Lab Frame System-Large, 4ft., Aluminum

    LLS004

    Lab Frame - Aluminum 48" X 72"

    CLEX01

    2-Prong Extension Clamp with Steel Rod

    COBR3-FR

    Burette Clamp With Boss Head, Coated Jaws

    ECLJ03

    3-Prong Clamp Extension Clamp With Steel Rod

    CLMS01

    Swivel Clamp Holder

    ECPVC1G

    3-Prong Clamp, With Rod, PVC Coated Grips

    CLCORK2

    2-Prong Clamp with Boss Head, Cork Coated Grips

    CLPVC2

    2-Prong Clamp with Boss Head, PVC Coated Grips

    ECPVC2G

    3-Prong Clamp, W/Boss Head, PVC Coated Grips

    CLHD03

    3-Prong Heavy Duty Extension Clamp with Stainless Steel Rod

    SRCI02

    Support Ring with Clamp 2" O.D.

    SRCI03

    Support Ring with Clamp 3" O.D.

    SRCI04

    Support Ring with Clamp 4" O.D.

    SRCI05

    Support Ring with Clamp 5" O.D.

    SRCI06

    Support Ring with Clamp 6" O.D.

    SRCI07

    Support Ring with Clamp 7" O.D.

    RTCLMP1

    Clamp Holder, Right Angle, Cast Aluminum

    Labware Essentials

    More Information
    Technical Specifications

    Model Number

    Description

    LLS001

    Lab Frame - Aluminum 24" X 24"

    LLS002

    Lab Frame - Aluminum 36" X 48"

    LLS003

    Lab Frame System-Large, 4ft., Aluminum

    LLS004

    Lab Frame - Aluminum 48" X 72"

    CLEX01

    2-Prong Extension Clamp with Steel Rod

    COBR3-FR

    Burette Clamp With Boss Head, Coated Jaws

    ECLJ03

    3-Prong Clamp Extension Clamp With Steel Rod

    CLMS01

    Swivel Clamp Holder

    ECPVC1G

    3-Prong Clamp, With Rod, PVC Coated Grips

    CLCORK2

    2-Prong Clamp with Boss Head, Cork Coated Grips

    CLPVC2

    2-Prong Clamp with Boss Head, PVC Coated Grips

    ECPVC2G

    3-Prong Clamp, W/Boss Head, PVC Coated Grips

    CLHD03

    3-Prong Heavy Duty Extension Clamp with Stainless Steel Rod

    SRCI02

    Support Ring with Clamp 2" O.D.

    SRCI03

    Support Ring with Clamp 3" O.D.

    SRCI04

    Support Ring with Clamp 4" O.D.

    SRCI05

    Support Ring with Clamp 5" O.D.

    SRCI06

    Support Ring with Clamp 6" O.D.

    SRCI07

    Support Ring with Clamp 7" O.D.

    RTCLMP1

    Clamp Holder, Right Angle, Cast Aluminum

    Model NumberClamp TypeProng Type
    CLBURDSBurette ClampSingle
    CLBURDDBurette ClampDouble

    Labware Essentials

    We found other products you might like!