BMT Vacuum Oven, Vacucell EVO 3.9 cu. ft. (111L) 115v, 15.7A, Max Temp 300°C

BMT Vacuum Oven, Vacucell EVO 3.9 cu. ft. (111L) 115v, 15.7A, Max Temp 300°C

BMT Vacuum Oven, Vacucell EVO 1.9 cu. ft. (55L) 115v, 10.5A, Max Temp 300°C

BMT Vacuum Oven, Vacucell EVO 1.9 cu. ft. (55L) 115v, 10.5A, Max Temp 300°C

BMT Ecocell 22 ECO, Natural Gravity Air Convection, 0.8 cu. ft. (22L), 115V, 8A

BMT Ecocell 22 ECO, Natural Gravity Air Convection, 0.8 cu. ft. (22L), 115V, 8A

BMT Vacuum Oven, Vacucell EVO 3.9 cu. ft. (111L) 115v, 15.7A, Max Temp 300°C

Availability: In stock
SKU
MC 001660
Description

Vacuum Oven

$21,137.00
BMT Vacuum Oven, Vacucell EVO 3.9 cu. ft. (111L) 115v, 15.7A, Max Temp 300°C is available to buy in increments of 1

The series VACUCELL is suitable for perfect drying of thermolabile and oxidation-sensitive materials, complicated components, for drying of samples up to a constant mass etc. in vacuum. These devices are suitable for plastic processing, in electrical engineering, chemical and pharmaceutical industry. The series VACUCELL is characterized by noiseless run and soft heating of samples in the chamber and offers high-quality and save heating and drying of samples up to a constant mass. Therefore it is suitable for perfect and safe tempering and drying not only of thermolabile, oxidation-sensitive or powder-like materials in laboratories, but also of complicated articles with many holes and threads in industry. The series VACUCELL offers high operation comfort and precise control and therefore it is suitable for demanding and precise tests and processes. The devices VACUCELL can be, on request, completed by the box “Vacustation” without or inclusive the selected type of vacuum pump. The devices VACUCELL meet requirements of technical-legislative regulations in CZ and EU

High-tech systems for heating and drying of materials with an accurate and reliable run of individual processes, suitable for use in research, development, production, business activities, or for quality control. The sectional principle that applies to the design of laboratory ovens allows a wide range of optional equipment and accessories. The basic model is available – depending on the oven type – in volume size range from 22 to 707 liters, with either natural or forced air circulation and possibility to connect the vacuum.

The parameters inside the unit chamber are monitored and documented with the help of a PC, using a special SW WarmComm (optional equipment).

The laboratory ovens line meets the requirements of reproducibility and accuracy of temperature distribution and other parameters in temperature boxes, derived form such quality standards like ISO 9000 or ISO/17025.

Our laboratory ovens comply with the requirements of operation in accredited or certified laboratories.

The principle of operation is based on vacuum drying with the possibility of chamber air extrusion by inert gas. An electrically heated stainless steel chamber enables precise heating and drying of samples up to a constant mass. The standard equipment also includes an integrated duct with the diameter of 40 mm, an inert gas connection and a needle valve for fine dosing. For a case of internal overpressure the unit is provided with a safety door valve ”Ventiflex”.

 

VacuCell, Quick, cost-saving, ecological

A vacuum drying with the possibility of chamber air extrusion by inert gas is offered by the line VACUCELL that can be used not only for heat labile and oxidation sensitive substances (powder, granulates, …) but also for pieces with hardly accessible openings and threads. These units are ideal for drying of samples up to a constant mass. They are to be used especially in the sphere of plastics processing, in pharmaceutical, chemical, electrical and other industries.

Features:

  • Quick, cost-saving, ecological - laboratory oven meeting higher demands
  • 111-liter chamber volume
  • Working temperature of from +5°C over ambient temperature up to 200/300°C
  • Noiseless operation and soft heating of samples in the chamber; high-quality and safe heating and drying of samples to constant mass
  • High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening
  • Suitable for perfect drying of thermolabile and oxidation-sensitive materials, complex-shape components, samples drying to constant mass etc. under vacuum
  • Model with a Fuzzy logic microprocessor control system
  • Wide range of optional equipment and accessories (e.g. a “Vacustation” box enabling a selected vacuum pump installation, …)
  • Output for a printer or PC connection
  • Validation possibility (IQ , OQ)

 

Basic design components

Self-supporting outer jacket made of galvanized steel sheet with hard and resistant baking varnish on the outer side. The inner single-jacket chamber with shelves is made of thick-wall stainless steel (DIN 1.4571, AISI 316 Ti). The door panel is made of large-area safety glass with a plastic foil, that enables to monitor processes in the chamber and serves as a large-area overpressure valve. For the purpose of energy saving and minimizing the heat radiated to the ambient air the chamber is perfectly insulated with an ecological insulating material. The inner walls of the chamber can be easily removed without using any tool, e.g. for the purpose of cleaning. On top of that the chamber has a continuously adjustable air flap and inner glass door. The door is secured at four points for perfect tightening. The standard equipment consists of integrated duct with the diameter of 40 mm, inert gas connection and needle valve.

Changes in the design and make reserved.

 

evo vacu

evo

Vac evo1

 

VacVac Chem

evo vac

Vac

 

 

 

 

Technical Specifications:

Model NumberMC 001660
Interior MaterialStainless Steel Material No. 1.4571
Internal Dimensions
Volume3.9 cu ft (111 L)
Depth16.1" (410mm)
Width21.3" (540mm)
Height18.9 (480mm)
Number of Trays2 pcs
Racks Max8 pcs
Shelves Dimensions
Height1.7" (43 mm)
Useful Dim. of Shelf 18.9" x 15.2" (480x386 mm)
External Dimensions 
Depth25.6" (650 mm)
Width29.9" (760 mm)
Height (incl. Feet)37.8" (960 mm)
Package Dimenisions 
Depth32.7" (830 mm)
Width36.6" (930 mm)
Height (incl. palette43.3" (1100 mm)
Weight
Gross480 lbs. (218 kg)
Net 293 lbs. (133 kg)
Working Temperature (Regulation Start)from 5 °C over ambient temp to 300°C
Temp. deviations acc. to DIN 12 880 Part 2 from working temp – Al shelves pressure 5–10 mbar**
In time to: 0,4 ± °C
In space, temperature 100 °C do: 3 ± °C
In space, temperature 200 °C do: 7 ± °C
Temp. deviations acc. to DIN 12 880 Part 2 from working temp – ss shelves pressure 5–10 mbar**
In time to: 1 ± °C
In space, temperature  100°C11 ± °C
In space, temperature  200°C26 ± °C
Time of rise onto 98 % voltage 230 V – (Al shelves pressure 5–10 mbar)
Onto Temp 100 °C110 min
Onto Temp 200 °C130 min
Time of rise onto 98 % voltage 230 V – (Al shelves pressure 5–10 mbar)
Onto Temp 100 °C170 min
Onto Temp 200 °C220 min
Heat radiation
at 100 °C370 W
at 200 °C750 W
Vacuum connection
Feedthrough needle valve for inert gas or air8 mm
Measuring Access40 mm
Vacuum Connection Measuring DN16 mm
Electric parameters – mains 50/60 Hz
Nominal voltage115 v
Maximum Power1806 kW
Current15.7 A
Max. permissible load of the shelves
Inside the Oven144 lbs (65 kg)
Per Shelves55 lbs (25 kg)

 

Stand Sold Separately

More Information
Technical Specifications
Model NumberMC 001660
Interior MaterialStainless Steel Material No. 1.4571
Internal Dimensions
Volume3.9 cu ft (111 L)
Depth16.1" (410mm)
Width21.3" (540mm)
Height18.9 (480mm)
Number of Trays2 pcs
Racks Max8 pcs
Shelves Dimensions
Height1.7" (43 mm)
Useful Dim. of Shelf 18.9" x 15.2" (480x386 mm)
External Dimensions 
Depth25.6" (650 mm)
Width29.9" (760 mm)
Height (incl. Feet)37.8" (960 mm)
Package Dimenisions 
Depth32.7" (830 mm)
Width36.6" (930 mm)
Height (incl. palette43.3" (1100 mm)
Weight
Gross480 lbs. (218 kg)
Net 293 lbs. (133 kg)
Working Temperature (Regulation Start)from 5 °C over ambient temp to 300°C
Temp. deviations acc. to DIN 12 880 Part 2 from working temp – Al shelves pressure 5–10 mbar**
In time to: 0,4 ± °C
In space, temperature 100 °C do: 3 ± °C
In space, temperature 200 °C do: 7 ± °C
Temp. deviations acc. to DIN 12 880 Part 2 from working temp – ss shelves pressure 5–10 mbar**
In time to: 1 ± °C
In space, temperature  100°C11 ± °C
In space, temperature  200°C26 ± °C
Time of rise onto 98 % voltage 230 V – (Al shelves pressure 5–10 mbar)
Onto Temp 100 °C110 min
Onto Temp 200 °C130 min
Time of rise onto 98 % voltage 230 V – (Al shelves pressure 5–10 mbar)
Onto Temp 100 °C170 min
Onto Temp 200 °C220 min
Heat radiation
at 100 °C370 W
at 200 °C750 W
Vacuum connection
Feedthrough needle valve for inert gas or air8 mm
Measuring Access40 mm
Vacuum Connection Measuring DN16 mm
Electric parameters – mains 50/60 Hz
Nominal voltage115 v
Maximum Power1806 kW
Current15.7 A
Max. permissible load of the shelves
Inside the Oven144 lbs (65 kg)
Per Shelves55 lbs (25 kg)