BMT Friocell 222 ECO, Cooling BOD Incubator, 7.8 cu. ft. (222L), 115v

BMT Friocell 222 ECO, Cooling BOD Incubator, 7.8 cu. ft. (222L), 115v

BMT Friocell 111 ECO, Cooling BOD Incubator, 3.9 cu. ft. (111L), 115v

BMT Friocell 111 ECO, Cooling BOD Incubator, 3.9 cu. ft. (111L), 115v

BMT Friocell 55 EVO, Cooling BOD Incubator, 1.9 cu. ft. (55L), 230v

BMT Friocell 55 EVO, Cooling BOD Incubator, 1.9 cu. ft. (55L), 230v

BMT Friocell 222 ECO, Cooling BOD Incubator, 7.8 cu. ft. (222L), 115v

Availability: In stock
SKU
MC 000236
Description

Cooling BOD Incubator

$10,890.00
BMT Friocell 222 ECO, Cooling BOD Incubator, 7.8 cu. ft. (222L), 115v is available to buy in increments of 1

FRIOCELL Precise, nature-adaptable, cost saving!

The high technical standard of our FRIOCELL incubators allows tempering of samples, precise both in time and space. The unique cooling system offers an exact and cost saving simulation of the selected natural processes and reduces the samples evaporation. The incubators can be used in biotechnology, botany, zoology, food industry, cosmetics, chemical industry, etc. where it allows an extremely low duration of the temperature recovery.

The high technical standard of the FRIOCELL product line with the chamber volume of 55, 111, 222, 404, 707 and 1212 liters and working temperature from 0°C up to 100°C aloows tempering of samples, precise in time and space. The patented cooling system (ecological cooling medium R134a) offers a precise and rapid simulation of natural processes and reduces the risk of sample evaporation. The devices can be provided with various types of inner chamber lighting. The FRIOCELL product line can be used in biotechnology, botany, zoology, food industry, cosmetics, chemical industry, etc. The patented system of cooling (ecological cooling medium R134a) and air flow in the chamber guarantee a rapid and precise reaching of the selected temperature profile in the chamber and consequently an ideal process of sample heating. The FRIOCELL product line offers high operating comfort, precise regulation, and possibility to reach even extreme short times of temperature changes and short times of temperature recovery in the chamber after the door opening. It is therefore suitable for demanding and exact tests and sample cultivation processes. The FRIOCELL units meet the requirements of the technical and legislative regulations both in CZ and EU.

Features:

  • Precise, nature-adaptable, cost-saving – laboratory incubator
  • 222-liter chamber volume
  • Working temperature of from 0°C up to 100°C
  • Patented cooling system (ecological cooling medium R134a) offers a precise and quick simulation of natural processes and reduces the risk of samples evaporation; various types of the inner chamber lighting can be added to the unit
  • High operation comfort; precise temperature regulation; possibility to reach even extremely short times of temperature changes and short times of temperature recovery in the chamber after the door opening; the standard equipment includes inner glass door and possibility to regulate the fan speed
  • Suitable for demanding and accurate tests and samples cultivation
  • Comfort model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LCD display
  • Wide range of optional equipment and accessories
  • Output for a printer or PC connection
  • Validation possibility (IQ , OQ)

 

Incubators for testing of stability and photostability, experimental plants growing, …

Cultivating FRIOCELL incubators equipped with an exposure light create optimal conditions for plant growth and tissue cultures cultivation under natural conditions. Large-capacity control unit enables easy programming and offers a wide range of parameters for day and night simulation (air flow / temperature / humidity / lightning). The units also meet the most demanding requirements for the photostability tests according to Part 2 of ICH Q1AR and Q1B guidelines, and to the European norms.

  • Type of light tubes installed as a standard: Luxline Plus – White 840
  • Light intensity: Max 30,000 Lx – shelves, max. 36,000 Lx – door

 

Optional types of the supplied light tubes:

  • Luxline Plus – Cool White 840
  • Luxline Plus - Daylight 860
  • Black Light Blue; Gro-Lux: increased proportion of blue and red color - support of photobiological plants processes
  • Aktiva – UV-white light

(Note: Some types of the above-mentioned light sources may not be available for all chamber volumes.)

 

Basic design components

Sturdy design and perfect protection against corrosion are ensured by a self-supporting outer jacket made of galvanized steel sheet with hard and resistant baking varnish on the outer side. The inner double-jacket chamber and the door panel are made of high-quality stainless steel (DIN 1.4301, AISI 304). For the purposes of energy saving and minimizing the heat radiated to the ambient air, the chamber is perfectly insulated with an ecological insulating material. The inner walls of the chamber can be easily removed without using any tool, e.g. for the purposes of cleaning. On top of that the chamber has a fan with a speed regulation, and an inner glass door. The door is secured at four points for perfect tightening.

The principle of operation is based on a fine forced air circulation combined with a patented powerful cooling system situated in the chamber. A unique system of air circulation within the chamber ensures a silent run and a fine heating of samples. A unique cooling system together with a multiprocessor control unit offers a precise and economical simulation of some natural processes and reduces the evaporation of samples.

High-tech systems for incubation – both heating and cooling, humidity and light control – intended for use in research, development, production, business activities, or quality control. The sectional principle that applies to the design of laboratory ovens allows a wide range of optional equipment and accessories.

The parameters inside the unit chamber are monitored and documented with the help of a PC, using a special SW WarmComm (optional equipment).

The laboratory incubators line meets the requirements of reproducibility and accuracy of temperature distribution and other parameters in laboratory incubators, derived form such quality standards like ISO 9000 or ISO/17025.

Our laboratory incubators comply with the requirements of operation in accredited or certified laboratories.

Frio

 

Friocell

 

eco

 

 

Technical Specifications

Model NumberMC 000236
Inner dimensions - Chamber, stainless steel
Volume7.8 cu ft. (222 l)
Depth20.5" (520 mm)
Width21.3" (540 mm)
Height29.9" (760 mm)
Volume of the steam space
299 cca l
Trays, stainless steel *)
Min. Distance Between Trays70 mm
Number max./usual10 / 2
Storage area (w × d)20.5" x 19.1" (520 × 485 mm)
Number of outer metal doors
1 pcs
Number of inner glass doors
1 pcs
Admissible weight of trays
Together inside the oven154 lbs. (70 kg)
Per 1 tray66 lbs. (30 kg)
Electricity data
Max. power850w
Protective systemIP 20
mains 50/60Hz115 v
Temperature data
Cooling/down time from 22 °C to 10 °C< 17 min
Heating/up time to 37 °C from the ambient temperature11 min
Working temperature from 0,0 to100 °C
Temperature accuracy - in time0,2 ± °C
Temperature accuracy - in space at 10 °C0,5 ± °C
Recovery time after 30 s door open
at 37 °C2 min
at 50 °C3 min
Heat emission
at 37 °C63 W
Outer dimensions, incl. door and handle, Feet (N) or Rollers (K)
Depth35.4" (900 mm)
Width29.9" (760 mm)
Height50.2" (1275 (N) mm)
Weight
Brut384 lbs. (174 kg)
Net302 lbs. (137 kg)

 

Stand Sold Separately

More Information
Technical Specifications
Model NumA1:B39berMC 000236
Inner dimensions - Chamber, stainless steel
Volume7.8 cu ft. (222 l)
Depth20.5" (520 mm)
Width21.3" (540 mm)
Height29.9" (760 mm)
Volume of the steam space
299 cca l
Trays, stainless steel *)
Min. Distance Between Trays70 mm
Number max./usual10 / 2
Storage area (w × d)20.5" x 19.1" (520 × 485 mm)
Number of outer metal doors
1 pcs
Number of inner glass doors
1 pcs
Admissible weight of trays
Together inside the oven154 lbs. (70 kg)
Per 1 tray66 lbs. (30 kg)
Electricity data
Max. power850w
Protective systemIP 20
mains 50/60Hz115 v
Temperature data
Cooling/down time from 22 °C to 10 °C< 17 min
Heating/up time to 37 °C from the ambient temperature11 min
Working temperature from 0,0 to100 °C
Temperature accuracy - in time0,2 ± °C
Temperature accuracy - in space at 10 °C0,5 ± °C
Recovery time after 30 s door open
at 37 °C2 min
at 50 °C3 min
Heat emission
at 37 °C63 W
Outer dimensions, incl. door and handle, Feet (N) or Rollers (K)
Depth35.4" (900 mm)
Width29.9" (760 mm)
Height50.2" (1275 (N) mm)
Weight
Brut384 lbs. (174 kg)
Net302 lbs. (137 kg)
Incubator TypeCooling & BOD
ControllerDigital