Mystaire® Isola™ EDGE 48" Ductless Filtered Workstation with EverSafe III Touch Microprocessor Controller, 110V
Ductless Fume Hood
Isola™ EDGE Filtered Workstation Chemical-resistant construction with superior filtration
Isola EDGE Filtered Chemical Workstation was designed and engineered to provide the end user with superior filtration while offering the same conveniences found on traditional laboratory hoods. The main chamber is dual-wall thermally-fused solid polypropylene allowing the installation of common laboratory fixtures and electrical outlets, if needed.
The main chamber, made from structural polypropylene, offers superior chemical resistance while the contoured entry foil provides both spill containment and smooth airflow dynamics. The angled and rolled entry design of the Isola EDGE promotes a smooth, turbulent-free work area which reduces eddy currents that affect containment.
EverSafe™ III TOUCH Control Advanced Microprocessor Safety Controller
The EverSafe™ III TOUCH control advanced microprocessor safety controller is designed to enable simple and precise user control of all hood or workstation functions. EverSafe™ III has 18 primary control icons that allow the end user to view and or modify the hood or workstation settings. The primary home screen features display of face velocity to show users they are working with OSHA requirements. Face velocity is vividly displayed in either linear feet per minute or meters per second. The lower portion of the EverSafe™ III TOUCH controller screen is designed to give the following information to the end user; current date, time and blower setting.
EverSafe™ III TOUCH control maintains fume hood or workstation face velocity by taking constant measurements at the opening and automatically adjusting airflow to ensure compliance to user preset values. The end user is allowed to determine desired face velocity through the “Blower Settings” icon. Mystaire® calibrates and ships each ductless hood and filtered workstation with a preset face velocity of 80 linear feet per minute or 0.4 meters per second.
Sophisticated electronic controls determine chemical breakthrough based on the type of solvents used within the hood or workstation. Visible and audible alarms alert the operator if airflow is at an unsafe level or if the installed filters are approaching saturation, allowing sufficient time to replace filters.
EverSafe™ III TOUCH control microprocessor safety controller allows the end user to select the built-in solid state gas detection package sensitivity. The solid state gas sensor can be set at three distinct levels that correspond to established occupation levels. A sensitivity level set point should be selected by the end user at is appropriate with the TLV for the current chemical being manipulated. This provides the end user with an audible and visual alarm that indicates the primary installed filtration has reached saturation and allows the installed safety filtration to protect the end user during experimentation shutdown.
EverSafe™ III TOUCH control displays current installed filtration within the hood or workstation and provides a bar graph consumption monitor to show filter life. The “FILTERS” icon, when pressed, displays the following filtration type; main, safety and prefilter. Additionally, the end user can select and change the three types of filters independently of the others.
Energy monitoring is standard with EverSafe™ III TOUCH control and continues to become a focal point of every laboratory. Cost of operation is a focal point in every business’s operational budget. EverSafe™ III TOUCH control allows end user display of hood or workstation energy consumption through the “ENERGY USE” icon. Displayed to the end user is a log of energy consumption, by the ductless hood or workstation, of the life time kilowatt hours and real time power/current/voltage.
- 48 inch width (1219 mm)
- EverSafe™ III TOUCH touch screen controller constantly monitors fume hood performance with audible and visible alarms
- Vividly displayed status of face velocity in linear feet per minute or meters per second
- 18-Icon display for simple touch control of hood features and functions
- LED lighting for true illumination of the entire work area
- Solid-state gas detection with three sensitivity set points
- Conforms to UL, CSA and CE electrical requirements
- Integral polypropylene spill basin with rolled foil entry
- Built-in filter and application validation
- Optional installation of gas, water, electrical fixtures and/or polypropylene sink
|Controls||EverSafe™ III TOUCH Touchscreen Safety Controller|
|Face Velocity - Variable||60-100 LFM|
|Low Airflow Alarm||Audible / Visual Alarm|
|Temperature Sensor||Audible / Visual Alarm|
|Humidity Sensor||Audible / Visual Alarm|
|Lab Timer||Audible / Visual Alarm|
|Certifications||UL and CSA Ceritified|
|External Dimensions (W x D x H)||48.9 x 36 x 53|
|Internal Dimensions (W x D x H)||42.0 x 24.7 x 36.8"|
|Sash Opening Dimensions (W x D x H)||42.0 x 9 x 25"|
|Volumes of Filtered Air||1110 CFM|
|Unit Weight||225 lbs|