Chemical Resistant Diaphragm Vacuum Pump, Chemker 400, 38lpm, 26.82inHg, AC110V,

Chemical Resistant Diaphragm Vacuum Pump, Chemker 400, 38lpm, 26.82inHg, AC110V,

Oil Free Laboratory Vacuum Pump, Model Rocker 300, 20 liters/minute, 26.82inHg, AC110V, 60Hz

Oil Free Laboratory Vacuum Pump, Model Rocker 300, 20 liters/minute, 26.82inHg, AC110V, 60Hz

Chemical Resistant Diaphragm Vacuum Pump, Chemker 400, 38lpm, 26.82inHg, AC110V,

Availability: In stock
SKU
169400-11
$1,272.93
  • Receive a free solar powered phone charger with purchase
Chemical Resistant Diaphragm Vacuum Pump, Chemker 400, 38lpm, 26.82inHg, AC110V, is available to buy in increments of 1

Chemker series pumps are chemical resistant diaphragm vacuum pumps which can be used with harsh acidic, basic and solvent vapors by utilizing corrosion proof PTFE on all the wetted surfaces. Through mechanical technology and innovation we have made the Chemker series to be quiet, safe, maintenance-free and cost effective.

All wetted parts of the Chemker series pumps are made of PTFE material which is resistant to most corrosive gases. Chemker series pumps are driven by a diaphragm which does not require lubricant, regular oil changes and maintenance thus produces no oil pollution. The direct drive motor and vibration proof assembly makes the Chemker series run at the lowest noise level compared to all other equivalent pumps. Every motor of the Chemker series pump has a built in thermal protection device to shut off the pump automatically when overheated and then resume working when the temperature cools down.

Features:

  • High chemical resistant
  • No air pollution, maintenance free
  • Start against vacuum
  • Quiet and low vibration:
  • Thermal protection device:
  • International safety certification, CE certification

Application Areas

  • Chemical and petrochemical Industry
  • Pharma Industry
  • Filtration processes
  • Vacuum distillation
  • Rotary evaporation
  • Vacuum and centrifugal concentration
  • Solid phase extraction
  • Conventional drying and gel drying
  • Advanced Substitute for water-jet pumps

Technical Specifications:

Model169400-11
Max. power (W)90w
Max. currentA1.1
Max. vacuum (inHg)26.82 inHg
Max. Flow Rate (L/min)38 L/min
Horsepower1/8 HP
Noise Level52 dB
Hose BarbID8 (5/16 inch)
Thermal ProtectionYes
Motor Speed (rpm)1700
Size WxDxHcm10.3 x 4.5 x 7.1 in. (26.7 x 11.2 x 18.1 cm)
Weight (kg)15lbs (7)
More Information
Technical Specifications
Model169400-11
Max. power (W)90w
Max. currentA1.1
Max. vacuum (inHg)26.82 inHg
Max. Flow Rate (L/min)38 L/min
Horsepower1/8 HP
Noise Level52 dB
Hose BarbID8 (5/16 inch)
Thermal ProtectionYes
Motor Speed (rpm)1700
Size WxDxHcm10.3 x 4.5 x 7.1 in. (26.7 x 11.2 x 18.1 cm)
Weight (kg)15lbs (7)

Pump TypeChemical Resistant
Max. Flow Rate37 l/min
Maximum Vacuum105mbar (26.82 inHg)
TypePump